Still image camera settings
There are two kinds of settings for the still image camera:
active toolbar settings and main settings. To use active
toolbar settings, see ‘Adjust color and lighting’, p. 56. The
active toolbar settings return to the default settings after
you close the camera, but the main settings remain the
same until you change them again.
To change the main settings, select
Options
>
Settings
and from the following:
Camera
56
Image quality
—
Print 2M - Large
(1600x1200
resolution),
Print 1M - Medium
(1152x864 resolution) or
MMS 0.3M - Small
(640x480 resolution). If you want to
print the image, select
Print 2M - Large
or
Print 1M -
Medium
. To send the image through MMS, select
MMS
0.3M - Small
.
These resolutions are only available in the main camera.
Add to album
—Select whether you want to save the image
to a certain album in the gallery. If you select
Yes
, a list of
available albums opens.
Show captured image
—Select
On
if you want to see the
captured image after it is taken, or
Off
if you want to
continue taking pictures immediately.
Default image name
—Define the default name for the
captured images.
Extended digital zoom
(main camera only)—
On
(continuous)
allows the zoom increments to be smooth
and continuous between digital and extended digital
zoom,
On (paused)
allows the zoom increments to pause
at the digital and extended digital step point, and
Off
allows a limited amount of zoom while retaining the image
resolution.
Capture tone
—Select the tone you want to hear when you
take a picture.
Memory in use
—Select where to store your images.
Restore camera settings
—Select
Yes
to return the default
values to the camera settings.